1998 Jeep Grand Cherokee Headlight Assembly
All Jeep Grand Cherokee Headlights for sale Tools required:
Step 1: Locate the T2 Torx screw that is between the headlight assembly and the blinker and remove it.
Step 2: Remove the two T2 screws that hold the marker light in place.
Step 3: Remove the marker light, but leaving it connected, move it to the side.
Step 4: You can now pull the headlight assembly from the vehicle.
Step 5: Disconnect the wiring harness on the back of the assembly.
NOTE: If you purchased your replacement headlight from Go-Parts, it likely includes the bulbs (as most of our models do). This saves you time, and allows you to move on to the installation of the new assembly.
Step 6: Connect the wiring harness to the new headlight assembly and move it into position.
Step 7: Secure the marker light by tightening the T2 mounting screws.
Step 8: Tighten the T2 screw that rests between the headlight assembly and the blinker.
These Part Change / Installation Instructions Apply to:93 1993, 94 1994, 95 1995, 96 1996, 97 1997, 98 1998 Jeep Grand Cherokee Headlights Replacement Instructions
You might also like
|
Building the Perfect PC, Second Edition Book (Maker Media, Inc)
|
|
Acts passed at a General Assembly of the Commonwealth of Virginia, begun and held at the public buildings in the city of Richmond, on Monday the ... one thousand seven hundred and eighty-seven. Book (Gale ECCO, Print Editions) |
